NAVEE ST3

If the remote control is not working, please follow these troubleshooting steps:

1. Press the Menu button five times consecutively. The signal light on the dashboard flashes, indicating pairing mode. Press the Power On/Off button or one of the electric assist buttons to confirm pairing. If the signal light and battery light remain on, pairing has been successful.

2. Ensure the remote control is powered on. If not, please recharge it.

Start by placing one foot on the pedal, extend the other leg behind you, place both feet on the footrest, and balance yourself. Then gently press the accelerator to start. It is recommended to ride at a constant speed and avoid sudden accelerations and braking. Note: The electric scooter only starts when it is in freewheel mode and has reached a speed of 5 km/h.

The NAVEE V series electric scooter is suitable for people aged 16 to 50, measuring between 120 and 200 cm; its maximum load is 120 kg. It is forbidden to drive after consuming alcohol or drugs that may impair judgment.

When you press the brake or release the accelerator to coast, energy recovery is activated, converting some of your kinetic energy into electrical energy that is stored and reused. Energy recovery can increase your range while providing braking. It is recommended to set the level to "Low" when first using it. After connecting to the Navee app, scroll down the main product interface to adjust the energy recovery intensity; the default setting is "Low", but you can choose from three levels: "Low", "Medium", and "High".

Each model has a different range, indicated in its user manual. Typical range is generally measured with a full charge, under calm traffic conditions, at a temperature of 25°C, at a constant speed of 15 km/h on a flat surface, and with a 75 kg payload. Actual range may vary depending on load, ambient temperature, wind strength, road conditions, tire pressure, battery charge level, driving mode, and driving habits (sudden accelerations and braking, etc.).

The vehicle's unique QR code is required to connect to the NAVEE app. You can obtain it as follows: after logging in to the app, go to the home screen: [More features] – [Settings] – [Vehicle QR code], display the QR code and take a screenshot. The vehicle's QR code can also be found on the sticker located on the back of the dashboard, on the right side of the driving position, and on the back of the owner's manual.

After activating the lock via the NAVEE app, the vehicle enters engine lock mode and automatically shuts down after 24 hours. The engine remains locked even after a restart. If you try to start the vehicle by pushing it while it is locked, an alarm will sound on the dashboard and the vehicle's buttons will be deactivated. This feature does not prevent theft; therefore, please monitor your vehicle carefully. Using the lock consumes scooter battery; please use it carefully.